Conventional Beam Pumping Unit

  • Crank and Beam Balanced Pumping Units.
  • Designed and manufactured in accordance to API SPEC 11E.
  • Compatible with electric motor, diesel engine and gas engines. 
  • Available in TL, TH, WL bases. 
  • Complete with counterweights, guard rails, bridles and ladder. 
  • In accordance to Australian structural safety standards.

Conventional Beam Pump or Pump Jacks had been the workhorse of the oil & gas industry for decades, they are reliable and require little maintenance and generally last a long time if they are well looked after and set up properly. 

We provide both Crank Balance and Beam Balance pumping units which are designed and manufactured in accordance to API Spec 11E and adhere to ISO 15614:2004 and AS 4024 guarding standards. All units supplied comes complete with counterweights, bridle, cables, rail guard, brakes prime mover mounting bracket. You have the option of chosing a TL (Narrow Low) base, WL (Wide Low) base or a TH (Narrow High) base. 

A very crucial part of the pumping unit is the gear box. A well made gearbox allows the producer to push the pumping unit harder without the fear of it breaking prematurely or simply having the unit last a longer run life. All units that we supply have gearboxes made by industry leading manufacturers and are used in thousands of pumping units around the world each year. Quality, stability and reliability is what producers look for in a beam pumping unit and that is exactly what we provide. 

Crank Balanced Pumping Unit

API 11E crank balanced pumping unit suitable for deeper wells and higher fluid production rates. The counterweights are located on the walking beam. The unit is designed to have a sturdy structure, stable performance, low noise emission and easy maintenance. 

The unit can be powered by conventional electric motor, variable frequency electric motor, diesel engine or gas engine. 

11900 to 42700 lbs

Load Ratings

36 to 250 inches

Stroke Length

80000 to 128000 in.lbs

Gearbox Torque Rating

12 SPM

Maximum Pumping Speed

Beam Balanced Pumping Unit

API 11E beam balanced pumping unit suitable for shallower wells and lower fluid production rates. The counterweights are located on the walking beam. The unit is designed to have a sturdy structure, stable performance, low noise emission and easy maintenance. 

The beam can be powered by conventional electric motor, variable frequency electric motor, diesel engine or gas engine. 

7600 to 13300 lbs

Load Ratings

42 to 100 inches

Stroke Length

40000 to 114000 in.lbs

Gearbox Torque Rating

10 SPM

Maximum Pumping Speed